Reusable nappies really aren’t too different from single-use nappies (apart from all the great features of course) and if you follow a few of our simple steps, you’ll be fitting them like a pro before you know it!

First, adjust the poppers to get the right fit for your baby. Doing this before you change your wriggly baby will make things a lot easier. If you’re using liners (either Messless or Revolutionary Reusable), place one in the centre of the nappy. Next, lay your baby down on the open nappy and pull the front up, securing in place by using the adjustable tabs. Check that the boosters and fabric are all tucked inside and that the elastic edge sits in the leg line. For a comfortable fit you should be able to slide two fingers easily into the waistband at the front.

Just like all nappies, you'll need to check and change them every 2 - 4 hours throughout the day. At night-time, combine boosters if required for a peaceful night's sleep. Our flexi booster is made from super-absorbent hemp and is extra long and designed to be folded for additional absorbency where needed (great for front sleepers).

YES! Our nappies are Revolutionary because they truly are the only nappy you'll need from newborn to potty! You'll never have to buy another nappy again!

When your baby is young their nappy should be regularly checked and changed every 2-4 hours. You can store used nappies in your Stay at Home Wet Bag for up to 3 days before washing. With this in mind, you'll need 20 nappies so that you have some to use while others are in the wash. Our Everything Bundle comes complete with all 20 nappies plus a selection of accessories.

Liners are designed to make nappy changes a little easier by catching poo and helping you to remove it in a mess-free way. Add one liner on top of the nappy and when it's time to change, simply lift off the liner and dispose of the poo down the toilet. Replace with a new liner at every nappy change. We offer two options; Messless Liners are disposable and made from plant-based materials and our Revolutionary Reusable Liners can be washed with your nappies and reused again and again.

Boosters are designed to add extra absorbency to your nappies. These are especially great for long periods such as overnight or if your baby is a heavy wetter. Before fitting the nappy, insert a booster into the pocket of your nappy.

Get your poppers into the right position before each nappy change – it’s a lot easier when you don’t have a wriggly baby in the nappy.

If you have a newborn baby you’ll need to use the bottom set of poppers, attaching them to the closing top set. Once your baby is a toddler you’ll probably have no need to use the poppers at all however the adjustable tabs at the front will allow you to alter the fit as their shape changes.

When it comes to changing your baby’s nappy, just open the nappy and remove any poo, tipping it into the toilet. Liners are really handy for this job and take the fuss out of this messy step. Our Messless liners can be thrown away after use whereas our Revolutionary Reusable liners can be set aside for the wash. If any poo gets onto the surface of the nappy, you may prefer to rinse it through to stop any staining.

Newborn poos are runnier as their diet is liquid. During this time, you can rinse off the poo under running water. This can be done in the toilet bowl or at the sink. If you use the toilet, hold on to one corner of the nappy firmly and let the clean water wash away the poo. If you use your sink, be sure to clean the sink afterwards.

Newborn poo doesn't need to be washed off before storing your dirty nappies until wash day, but it will help to reduce odours and staining.

When wash day comes, don't overload your washing machine to allow your nappies to wriggle around in the wash and get extra clean.

When you start weaning your baby onto solid food, you'll notice their poo will change. At this stage, our Messless liners or Revolutionary Reusable liners will make cleaning your nappies quicker and easier. Both of these are designed to sit inside the nappy to catch solids and help reduce soiling.

Store your nappies for up to 3 days at most and when wash day arrives, empty the contents of your Stay at home wet bag into the washing machine drum. For an economical and planet-friendly wash, it’s best to always do full loads but make sure you don't overload your washing machine. Filling your machine to around ¾ full will ensure your nappies can wriggle around in the wash and get extra clean. We recommend washing your nappies at 40°C with non-biological laundry detergent. There's no need to use fabric softener when washing, as this can affect the absorbency of your nappies.

We recommend air drying your nappies either inside or outside whenever possible and away from direct heat. If necessary, our nappies can be tumble-dried on a low/cold setting.

Our Revolutionary Reusable nappies have adjustable front tabs which can be folded back on themselves and secured. This will stop the loop side from damaging any fabrics in the wash.

When you take a used nappy off your baby, we recommend you remove any boosters from the nappy pocket before you store them. If you have any boosters still inside the nappies, remove them before you fill your machine.

In between washes, store your nappies for three days at most in your Stay at home wet bag. This can be positioned anywhere that is within reach of your change table. The wet bag can be sealed shut using a fold, roll and clip method however we recommend leaving the bag open if possible which will allow air to circulate and reduce odours.

No. Pre-washing is not required if you follow our washing instructions carefully. Reducing the amount of time you use your machine is a great way to lower your carbon footprint and our nappies are designed for a simple and easy clean. However, if you do decide you need to run a pre-wash, select a short, cold wash cycle and half a scoop of detergent, and then store your nappies damp until you have enough nappies for a full wash.

Absolutely! And this is a great way to ensure you are using your machine and energy as efficiently as possible.

No, please don't iron your nappies, as this can affect their performance.

Sometimes your nappies just need a little extra TLC to remove any build-up of detergent or residues. A strip wash is a great way to give them a refresh and keep them performing at their best. Here’s our recommended routine:

Short wash without detergent – Run a quick cycle at 40°C.
Long wash with detergent – Pop in a full dose of your usual non-bio detergent and wash at 40°C.
Long wash without detergent – Wash again at 40°C, this time without detergent.
Final rinse – Rinse until the water runs clear and you can’t see any suds in the machine window. A short wash or extra rinse cycle works perfectly.
Tip: This process doesn’t need to be done regularly—only if your nappies start to smell, feel less absorbent, or if you’ve had a build-up of detergent.